Two Tone

Best stuff to two tone an airsoft gun with?

What is the best thing to two tone an airsoft gun with?

That would be spray paint.
I gave answers to a few other spray paint questions, so this is mostly a copy and paste from my other answers. Info is still good though.

This is the spray paint that I use on all of my guns. It dries very fast, doesn't drip as much as krylon, and is the perfect matte black color....

http://www.markingpendepot.com/index.asp…

I bought it at Home Depot, but I'm not sure if they carry it anymore... I don't have much left
*These paints do not come in any other colors such as silver or chrome. I'm not sure what colors you're using, but ill assume its a silver like on other two tone guns... Any silver paint at Home Depot will work.

**The tips below are for painting a pistol, but the same rule applies. Separate the parts to be painted from the parts to be left alone. Tape off any spaces where paint could cause a problem.

As for some Spray painting tips, here are a few common sense ones. Unscrew and take off the grips before you do anything. Place the pistol on a piece of cardboard somewhere outside in moderate sunlight to hasten drying. Keep the spray can a good 6 inches away from the pistol and slowly make streaks along the gun, ever so slightly covering it. Get a decent coating on and leave it for 5 minutes to dry. Make sure to not spray in one place to long, or the paint might start to drip and look crappy. Wet paint seeping into the cracks of the pistol could wreak havoc too so remember to slowly paint and in moderation. Keep repeating until the gun is completely covered. Wait at least 20 minutes before flipping the gun over to spray the other side. WORK SLOWLY!!!! I cannot stress that enough lol. Take even more time than I tell you too if you can. After you are completely done, leave the pistol to dry somewhere for about 48-72 hours. Then screw the grips back on and enjoy. The gun may feel a little stiff, but will break in easily. If you do the job right it will be good from the get go.

Afterwards it may be a good idea to spray a matte clear-coat over the finished paint to make it last. Just know that clear coat is pretty thick and is tough to keep from dripping.

Good luck.

Can"t find what you are looking for? Check out these products from Amazon.